MINI-UPS NETRIX (NANO+ROUTER)

Specification

Model NX-DC18P8.8
Input 85-265Vac/50-60Hz
Output USB 5V/2A
DC 5V/2A
DC 9V/1A
DC 12V/1A
POE 15V/0.6A
POE 24V/0.6A
USB 5V/2A

Output
power(Max.)  18W

Quantity &
Capacity of battery
8800mAh
Operate
temperature
-10℃ ~ 50℃
Humidity 10%-90%RH
Dimension 160*105*33mm
Net weight 0.38kg 0.42kg

1) Built-in adapter allows wide AC voltage range 85Vac-265Vac.
2) Built-in high capacity lithium batteries, provides long backup time to loads.
3) Suitable for most digital device.
4) Power over Ethernet (POE) can transmit the data and power at the same time to simplify wire set.
5) 5V USB output, can provide charging for mobile phone, PSP, PDA, IPOD, MP4….etc.
6) Intelligent circuit design with over-charging, over-discharging and short circuit protections.

Operation

In order to avoid over-discharging of the lithium batteries, please restart the UPS when the AC is
available after low battery cutoff.
2) Before connecting the loads to the UPS, it is must to check their nominal working voltage, current and
polarity which you can find on their original adapters.
3) Please charge the UPS full of battery before connect with loads.
4) The output power of this model is controlled by total power capacity. The total power of the loads which
connect to all the ports can’t exceed the maximum output power. Otherwise, all the output ports will be
closed, and the UPS will be shut down automatically after the light of status flashing in 5 seconds. In this
situation, please remove the exceed loads.
5) Press and hold the power button for 2-3 seconds to switch on the UPS. The output voltage of POE port
can be selected between 15V and 24V by moving the POE voltage switch. After plug in the city power,
the status lights become green for charging. The 100% means is full of charge. In the process of charging,
the power indicator lights indicate the capacity of the battery by 25%, 50%, 75% and 100% increasingly.
When disconnect the city power, the status lights become red for battery backup mode, and the power
indicator light will turn off one by one from 100%, 75%, 50% to 25%. When the light of 25% is flashing, it
means that the battery power is very low, then press and hold the power button for 2-3 seconds to turn
off the UPS and stop output voltage.
6) The USB provides stable charging to the 5V digital products with their original charging cables.
7) UPS will be shut down automatically when it is low battery, it will restart the output power when the AC
is recovering.
8) If the UPS not used for long time, please keep full of charge and keep it in the cool place. If the storage
time is too long to turn on, please plug in the city power for charging till the status lights become green.
It’s recommend to charge the battery once per month.

Instructions of the Components

1) 100% Battery capacity LED indicator
2) 75% battery capacity LED indicator
3) 50% battery capacity LED indicator
4) 25% battery capacity LED indicator
5) Work status indicator
6) ON/OFF Switch
7) Reset button for POE
8) Ethernet output interface (POE output:15V/24V)
9) LAN Ethernet interface
10) Output voltage Selector(15V/24V)
11) USB (5Vdc) output port.
12) AC input socket
13) Output port(5V)
14) Output port(12V)
15) Output port(9V